Daily Papers

We document stable cross-asset patterns in cryptocurrency limit-order-book microstructure: the same engineered order book and trade features exhibit remarkably similar predictive importance and SHAP dependence shapes across assets spanning an order of magnitude in market capitalization (BTC, LTC, ETC, ENJ, ROSE). The data covers Binance Futures perpetual contract order books and trades on 1-second frequency starting from January 1st, 2022 up to October 12th, 2025. Using a unified CatBoost modeling pipeline with a direction-aware GMADL objective and time-series cross validation, we show that feature rankings and partial effects are stable across assets despite heterogeneous liquidity and volatility. We connect these SHAP structures to microstructure theory (order flow imbalance, spread, and adverse selection) and validate tradability via a conservative top-of-book taker backtest as well as fixed depth maker backtest. Our primary novelty is a robustness analysis of a major flash crash, where the divergent performance of our taker and maker strategies empirically validates classic microstructure theories of adverse selection and highlights the systemic risks of algorithmic trading. Our results suggest a portable microstructure representation of short-horizon returns and motivate universal feature libraries for crypto markets.

We present two different methods for estimating the cost of solving SAT problems. The methods focus on the online behaviour of the backtracking solver, as well as the structure of the problem. Modern SAT solvers present several challenges to estimate search cost including coping with nonchronological backtracking, learning and restarts. Our first method adapt an existing algorithm for estimating the size of a search tree to deal with these challenges. We then suggest a second method that uses a linear model trained on data gathered online at the start of search. We compare the effectiveness of these two methods using random and structured problems. We also demonstrate that predictions made in early restarts can be used to improve later predictions. We conclude by showing that the cost of solving a set of problems can be reduced by selecting a solver from a portfolio based on such cost estimations.

Backdoor learning is an emerging and vital topic for studying deep neural networks' vulnerability (DNNs). Many pioneering backdoor attack and defense methods are being proposed, successively or concurrently, in the status of a rapid arms race. However, we find that the evaluations of new methods are often unthorough to verify their claims and accurate performance, mainly due to the rapid development, diverse settings, and the difficulties of implementation and reproducibility. Without thorough evaluations and comparisons, it is not easy to track the current progress and design the future development roadmap of the literature. To alleviate this dilemma, we build a comprehensive benchmark of backdoor learning called BackdoorBench. It consists of an extensible modular-based codebase (currently including implementations of 8 state-of-the-art (SOTA) attacks and 9 SOTA defense algorithms) and a standardized protocol of complete backdoor learning. We also provide comprehensive evaluations of every pair of 8 attacks against 9 defenses, with 5 poisoning ratios, based on 5 models and 4 datasets, thus 8,000 pairs of evaluations in total. We present abundant analysis from different perspectives about these 8,000 evaluations, studying the effects of different factors in backdoor learning. All codes and evaluations of BackdoorBench are publicly available at https://backdoorbench.github.io.

Early backdoor attacks against machine learning set off an arms race in attack and defence development. Defences have since appeared demonstrating some ability to detect backdoors in models or even remove them. These defences work by inspecting the training data, the model, or the integrity of the training procedure. In this work, we show that backdoors can be added during compilation, circumventing any safeguards in the data preparation and model training stages. The attacker can not only insert existing weight-based backdoors during compilation, but also a new class of weight-independent backdoors, such as ImpNet. These backdoors are impossible to detect during the training or data preparation processes, because they are not yet present. Next, we demonstrate that some backdoors, including ImpNet, can only be reliably detected at the stage where they are inserted and removing them anywhere else presents a significant challenge. We conclude that ML model security requires assurance of provenance along the entire technical pipeline, including the data, model architecture, compiler, and hardware specification.

We present an online method for estimating the cost of solving SAT problems. Modern SAT solvers present several challenges to estimate search cost including non-chronological backtracking, learning and restarts. Our method uses a linear model trained on data gathered at the start of search. We show the effectiveness of this method using random and structured problems. We demonstrate that predictions made in early restarts can be used to improve later predictions. We also show that we can use such cost estimations to select a solver from a portfolio.

Verifiers play a crucial role in large language model (LLM) reasoning, needed by post-training techniques such as reinforcement learning. However, reliable verifiers are hard to get for difficult coding problems, because a well-disguised wrong solution may only be detected by carefully human-written edge cases that are difficult to synthesize. To address this issue, we propose HARDTESTGEN, a pipeline for high-quality test synthesis using LLMs. With this pipeline, we curate a comprehensive competitive programming dataset HARDTESTS with 47k problems and synthetic high-quality tests. Compared with existing tests, HARDTESTGEN tests demonstrate precision that is 11.3 percentage points higher and recall that is 17.5 percentage points higher when evaluating LLM-generated code. For harder problems, the improvement in precision can be as large as 40 points. HARDTESTS also proves to be more effective for model training, measured by downstream code generation performance. We will open-source our dataset and synthesis pipeline at https://leililab.github.io/HardTests/.

Automated test generation holds great promise for alleviating the burdens of manual test creation. However, existing search-based techniques compromise on test readability, while LLM-based approaches are prohibitively expensive in practice. We present TestForge, an agentic unit testing framework designed to cost-effectively generate high-quality test suites for real-world code. Our key insight is to reframe LLM-based test generation as an iterative process. TestForge thus begins with tests generated via zero-shot prompting, and then continuously refines those tests based on feedback from test executions and coverage reports. We evaluate TestForge on TestGenEval, a real world unit test generation benchmark sourced from 11 large scale open source repositories; we show that TestForge achieves a pass@1 rate of 84.3%, 44.4% line coverage and 33.8% mutation score on average, outperforming prior classical approaches and a one-iteration LLM-based baseline. TestForge produces more natural and understandable tests compared to state-of-the-art search-based techniques, and offers substantial cost savings over LLM-based techniques (at $0.63 per file). Finally, we release a version of TestGenEval integrated with the OpenHands platform, a popular open-source framework featuring a diverse set of software engineering agents and agentic benchmarks, for future extension and development.

While self-correction has shown promise in improving LLM outputs in terms of style and quality (e.g. Chen et al., 2023; Madaan et al., 2023), recent attempts to self-correct logical or reasoning errors often cause correct answers to become incorrect, resulting in worse performances overall (Huang et al., 2023). In this paper, we break down the self-correction process into two core components: mistake finding and output correction. For mistake finding, we release BIG-Bench Mistake, a dataset of logical mistakes in Chain-of-Thought reasoning traces. We provide benchmark numbers for several state-of-the-art LLMs, and demonstrate that LLMs generally struggle with finding logical mistakes. For output correction, we propose a backtracking method which provides large improvements when given information on mistake location. We construe backtracking as a lightweight alternative to reinforcement learning methods, and show that it remains effective with a reward model at 60-70% accuracy.

The widespread consumer-grade 3D printers and learning resources online enable novices to self-train in remote settings. While troubleshooting plays an essential part of 3D printing, the process remains challenging for many remote novices even with the help of well-developed online sources, such as online troubleshooting archives and online community help. We conducted a formative study with 76 active 3D printing users to learn how remote novices leverage online resources in troubleshooting and their challenges. We found that remote novices cannot fully utilize online resources. For example, the online archives statically provide general information, making it hard to search and relate their unique cases with existing descriptions. Online communities can potentially ease their struggles by providing more targeted suggestions, but a helper who can provide custom help is rather scarce, making it hard to obtain timely assistance. We propose 3DPFIX, an interactive 3D troubleshooting system powered by the pipeline to facilitate Human-AI Collaboration, designed to improve novices' 3D printing experiences and thus help them easily accumulate their domain knowledge. We built 3DPFIX that supports automated diagnosis and solution-seeking. 3DPFIX was built upon shared dialogues about failure cases from Q&A discourses accumulated in online communities. We leverage social annotations (i.e., comments) to build an annotated failure image dataset for AI classifiers and extract a solution pool. Our summative study revealed that using 3DPFIX helped participants spend significantly less effort in diagnosing failures and finding a more accurate solution than relying on their common practice. We also found that 3DPFIX users learn about 3D printing domain-specific knowledge. We discuss the implications of leveraging community-driven data in developing future Human-AI Collaboration designs.

Propositional satisfiability (SAT) is an NP-complete problem that impacts many research fields, such as planning, verification, and security. Mainstream modern SAT solvers are based on the Conflict-Driven Clause Learning (CDCL) algorithm. Recent work aimed to enhance CDCL SAT solvers using Graph Neural Networks (GNNs). However, so far this approach either has not made solving more effective, or required substantial GPU resources for frequent online model inferences. Aiming to make GNN improvements practical, this paper proposes an approach called NeuroBack, which builds on two insights: (1) predicting phases (i.e., values) of variables appearing in the majority (or even all) of the satisfying assignments are essential for CDCL SAT solving, and (2) it is sufficient to query the neural model only once for the predictions before the SAT solving starts. Once trained, the offline model inference allows NeuroBack to execute exclusively on the CPU, removing its reliance on GPU resources. To train NeuroBack, a new dataset called DataBack containing 120,286 data samples is created. Finally, NeuroBack is implemented as an enhancement to a state-of-the-art SAT solver called Kissat. As a result, it allowed Kissat to solve 5.2% more problems on the recent SAT competition problem set, SATCOMP-2022. NeuroBack therefore shows how machine learning can be harnessed to improve SAT solving in an effective and practical manner.

Benchmarks are pivotal in driving AI progress, and invalid benchmark questions frequently undermine their reliability. Manually identifying and correcting errors among thousands of benchmark questions is not only infeasible but also a critical bottleneck for reliable evaluation. In this work, we introduce a framework for systematic benchmark revision that leverages statistical analysis of response patterns to flag potentially invalid questions for further expert review. Our approach builds on a core assumption commonly used in AI evaluations that the mean score sufficiently summarizes model performance. This implies a unidimensional latent construct underlying the measurement experiment, yielding expected ranges for various statistics for each item. When empirically estimated values for these statistics fall outside the expected range for an item, the item is more likely to be problematic. Across nine widely used benchmarks, our method guides expert review to identify problematic questions with up to 84\% precision. In addition, we introduce an LLM-judge first pass to review questions, further reducing human effort. Together, these components provide an efficient and scalable framework for systematic benchmark revision.

The automated generation of test code can reduce the time and effort required to build software while increasing its correctness and robustness. In this paper, we present RE-ASSERT, an approach for the automated generation of JUnit test asserts which produces more accurate asserts than previous work with fewer constraints. This is achieved by targeting projects individually, using precise code-to-test traceability for learning and by generating assert statements from the method-under-test directly without the need to write an assert-less test first. We also utilise Reformer, a state-of-the-art deep learning model, along with two models from previous work to evaluate ReAssert and an existing approach, known as ATLAS, using lexical accuracy,uniqueness, and dynamic analysis. Our evaluation of ReAssert shows up to 44% of generated asserts for a single project match exactly with the ground truth, increasing to 51% for generated asserts that compile. We also improve on the ATLAS results through our use of Reformer with 28% of generated asserts matching exactly with the ground truth. Reformer also produces the greatest proportion of unique asserts (71%), giving further evidence that Reformer produces the most useful asserts.

Open benchmarks are essential for evaluating and advancing large language models, offering reproducibility and transparency. However, their accessibility makes them likely targets of test set contamination. In this work, we introduce DyePack, a framework that leverages backdoor attacks to identify models that used benchmark test sets during training, without requiring access to the loss, logits, or any internal details of the model. Like how banks mix dye packs with their money to mark robbers, DyePack mixes backdoor samples with the test data to flag models that trained on it. We propose a principled design incorporating multiple backdoors with stochastic targets, enabling exact false positive rate (FPR) computation when flagging every model. This provably prevents false accusations while providing strong evidence for every detected case of contamination. We evaluate DyePack on five models across three datasets, covering both multiple-choice and open-ended generation tasks. For multiple-choice questions, it successfully detects all contaminated models with guaranteed FPRs as low as 0.000073% on MMLU-Pro and 0.000017% on Big-Bench-Hard using eight backdoors. For open-ended generation tasks, it generalizes well and identifies all contaminated models on Alpaca with a guaranteed false positive rate of just 0.127% using six backdoors.

Deep neural networks (DNNs) are vulnerable to backdoor attacks. The backdoor adversaries intend to maliciously control the predictions of attacked DNNs by injecting hidden backdoors that can be activated by adversary-specified trigger patterns during the training process. One recent research revealed that most of the existing attacks failed in the real physical world since the trigger contained in the digitized test samples may be different from that of the one used for training. Accordingly, users can adopt spatial transformations as the image pre-processing to deactivate hidden backdoors. In this paper, we explore the previous findings from another side. We exploit classical spatial transformations (i.e. rotation and translation) with the specific parameter as trigger patterns to design a simple yet effective poisoning-based backdoor attack. For example, only images rotated to a particular angle can activate the embedded backdoor of attacked DNNs. Extensive experiments are conducted, verifying the effectiveness of our attack under both digital and physical settings and its resistance to existing backdoor defenses.

Industry 4.0 has revolutionized manufacturing by driving digitalization and shifting the paradigm toward additive manufacturing (AM). Fused Deposition Modeling (FDM), a key AM technology, enables the creation of highly customized, cost-effective products with minimal material waste through layer-by-layer extrusion, posing a significant challenge to traditional subtractive methods. However, the susceptibility of material extrusion techniques to errors often requires expert intervention to detect and mitigate defects that can severely compromise product quality. While automated error detection and machine learning models exist, their generalizability across diverse 3D printer setups, firmware, and sensors is limited, and deep learning methods require extensive labeled datasets, hindering scalability and adaptability. To address these challenges, we present a process monitoring and control framework that leverages pre-trained Large Language Models (LLMs) alongside 3D printers to detect and address printing defects. The LLM evaluates print quality by analyzing images captured after each layer or print segment, identifying failure modes and querying the printer for relevant parameters. It then generates and executes a corrective action plan. We validated the effectiveness of the proposed framework in identifying defects by comparing it against a control group of engineers with diverse AM expertise. Our evaluation demonstrated that LLM-based agents not only accurately identify common 3D printing errors, such as inconsistent extrusion, stringing, warping, and layer adhesion, but also effectively determine the parameters causing these failures and autonomously correct them without any need for human intervention.

Scaling test-time computation, or affording a generator large language model (LLM) extra compute during inference, typically employs the help of external non-generative evaluators (i.e., reward models). Concurrently, LLM-judges, models trained to generate evaluations and critiques (explanations) in natural language, are becoming increasingly popular in automatic evaluation. Despite judge empirical successes, their effectiveness as evaluators in test-time scaling settings is largely unknown. In this paper, we introduce the Judge Evaluation for Test-Time Scaling (JETTS) benchmark, which evaluates judge performance in three domains (math reasoning, code generation, and instruction following) under three task settings: response reranking, step-level beam search, and critique-based response refinement. We evaluate 10 different judge models (7B-70B parameters) for 8 different base generator models (6.7B-72B parameters). Our benchmark shows that while judges are competitive with outcome reward models in reranking, they are consistently worse than process reward models in beam search procedures. Furthermore, though unique to LLM-judges, their natural language critiques are currently ineffective in guiding the generator towards better responses.

We present the Open Stamped Parts Dataset (OSPD), featuring synthetic and real images of stamped metal sheets for auto manufacturing. The real part images, captured from 7 cameras, consist of 7,980 unlabeled images and 1,680 labeled images. In addition, we have compiled a defect dataset by overlaying synthetically generated masks on 10\% of the holes. The synthetic dataset replicates the real manufacturing environment in terms of lighting and part placement relative to the cameras. The synthetic data includes 7,980 training images, 1,680 validation images and 1,680 test images, each with bounding box and segmentation mask annotations around all holes. 10\% of the holes in the synthetic data mimic defects generated in the real image dataset. We trained a hole-detection model on the synthetic-OSPD, achieving a modified recall score of 67.2\% and a precision of 94.4\% . We anticipate researchers in auto manufacturing use OSPD to advance the state of the art in defect detection of stamped holes in the metal-sheet stamping process. The dataset is available for download at: https://tinyurl.com/hm6xatd7.

RocketSmith is an agentic system which intelligently automates the DFAM process for the development of high powered rockets suitable for launch. The system utilizes a large language model to orchestrate the execution of software tools to validate design characteristics such as flight stability and generate the parametric design components for the rocket assembly. A collection of subagents and skills enable optimization workflows of flight parameters via iteration in both zero-shot and human-in-the-loop workflows. With this system, four distinct high power rockets with various motor and assembly configurations were developed utilizing the unique design capabilities of additive manufacturing. These assembly components were fabricated using various FDM printers, manually evaluated for flight readiness, and flight tested at a launch event. From these tests, all rockets achieved a stable launch and two of the four rockets were successfully recovered in reflyable condition. The altimeter data validated that the rockets achieved an altitude 80% of the expected apogee predicted by the agentic system, establishing consistency between simulation and experimentation.

Scientific figures are among the most effective means of communicating complex research ideas, yet producing publication-quality illustrations remains one of the most labor-intensive parts of paper preparation. Existing automated systems each target a single figure type under text-only input, leaving the diversity of types and conditions researchers actually use unaddressed; their raster outputs further cannot be locally revised. Because scientific figures are structured compositions of discrete semantic components, the localized errors generators produce on such layouts demand not a stronger backbone but a harness. We instantiate this harness in two complementary systems: Crafter, a multi-agent harness for figure generation that generalizes across figure types and input conditions without architectural changes, and CraftEditor, which applies the same pattern to convert raster outputs into editable SVGs. Moreover, we introduce CraftBench, a benchmark spanning three figure types and four input conditions with human quality annotation. Experiments show that Crafter substantially outperforms both standalone generators and the agentic baseline on PaperBanana-Bench and CraftBench, with ablations confirming each component's independent contribution; CraftEditor faithfully converts outputs into editable SVGs that surpass all baselines. Our code and benchmark are available at https://github.com/HaozheZhao/Crafter.

This paper provides an empirical implementation of the creative quality metric proposed in Calibrated Surprise (Zou & Xu, 2026a). The question this paper addresses is: does this mathematical claim hold at the engineering level? To make the answer as general as possible, we deliberately choose the strictest engineering conditions: low data cost and a small base model. Training data comes from approximately 100 expert chain-of-thought (CoT) annotations produced by the BC Protocol (Zou & Xu, 2026b). We also identify a data bias: most publicly available alignment datasets are skewed toward craft-related knowledge, while audience modeling and reality-logic coverage are systematically weak. We use the term Creative Quality Alignment (CQA) to describe this class of engineering methods. We also offer a supporting theoretical observation: in an LLM with a single conditional distribution architecture, calibrating the appreciation side automatically transfers to the generation side via architectural duality. This is the structural reason why ~100 CoT examples are sufficient -- not a purely empirical observation like LIMA (Zhou et al., 2023).

Software testing plays a critical role in ensuring that systems behave as intended. However, existing automated testing approaches struggle to match the capabilities of human engineers due to key limitations such as test locality, lack of general reliability, and business logic blindness. In this work, we propose a novel framework that leverages functional programming and type systems to translate Scala backend code into formal Lean representations. Our pipeline automatically generates theorems that specify the intended behavior of APIs and database operations, and uses LLM-based provers to verify them. When a theorem is proved, the corresponding logic is guaranteed to be correct and no further testing is needed. If the negation of a theorem is proved instead, it confirms a bug. In cases where neither can be proved, human intervention is required. We evaluate our method on realistic backend systems and find that it can formally verify over 50% of the test requirements, which suggests that half of a testing engineer's workload can be automated. Additionally, with an average cost of only $2.19 per API, LLM-based verification is significantly more cost-effective than manual testing and can be scaled easily through parallel execution. Our results indicate a promising direction for scalable, AI-powered software testing, with the potential to greatly improve engineering productivity as models continue to advance.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Third-party resources (e.g., samples, backbones, and pre-trained models) are usually involved in the training of deep neural networks (DNNs), which brings backdoor attacks as a new training-phase threat. In general, backdoor attackers intend to implant hidden backdoor in DNNs, so that the attacked DNNs behave normally on benign samples whereas their predictions will be maliciously changed to a pre-defined target label if hidden backdoors are activated by attacker-specified trigger patterns. To facilitate the research and development of more secure training schemes and defenses, we design an open-sourced Python toolbox that implements representative and advanced backdoor attacks and defenses under a unified and flexible framework. Our toolbox has four important and promising characteristics, including consistency, simplicity, flexibility, and co-development. It allows researchers and developers to easily implement and compare different methods on benchmark or their local datasets. This Python toolbox, namely BackdoorBox, is available at https://github.com/THUYimingLi/BackdoorBox.

Exploratory GUI testing is essential for software quality but suffers from high manual costs. While Multi-modal Large Language Model (MLLM) agents excel in navigation, they fail to autonomously discover defects due to two core challenges: Goal-Oriented Masking, where agents prioritize task completion over reporting anomalies, and Execution-Bias Attribution, where system defects are misidentified as agent errors. To address these, we first introduce GUITestBench, the first interactive benchmark for this task, featuring 143 tasks across 26 defects. We then propose GUITester, a multi-agent framework that decouples navigation from verification via two modules: (i) a Planning-Execution Module (PEM) that proactively probes for defects via embedded testing intents, and (ii) a Hierarchical Reflection Module (HRM) that resolves attribution ambiguity through interaction history analysis. GUITester achieves an F1-score of 48.90\% (Pass@3) on GUITestBench, outperforming state-of-the-art baselines (33.35\%). Our work demonstrates the feasibility of autonomous exploratory testing and provides a robust foundation for future GUI quality assurance~Our code is now available in~\href{https://github.com/ADaM-BJTU/GUITestBench{https://github.com/ADaM-BJTU/GUITestBench}}.

How can we use AI to discover a new state of the art for a scientific problem? Prior work in test-time scaling, such as AlphaEvolve, performs search by prompting a frozen LLM. We perform reinforcement learning at test time, so the LLM can continue to train, but now with experience specific to the test problem. This form of continual learning is quite special, because its goal is to produce one great solution rather than many good ones on average, and to solve this very problem rather than generalize to other problems. Therefore, our learning objective and search subroutine are designed to prioritize the most promising solutions. We call this method Test-Time Training to Discover (TTT-Discover). Following prior work, we focus on problems with continuous rewards. We report results for every problem we attempted, across mathematics, GPU kernel engineering, algorithm design, and biology. TTT-Discover sets the new state of the art in almost all of them: (i) Erdős' minimum overlap problem and an autocorrelation inequality; (ii) a GPUMode kernel competition (up to 2times faster than prior art); (iii) past AtCoder algorithm competitions; and (iv) denoising problem in single-cell analysis. Our solutions are reviewed by experts or the organizers. All our results are achieved with an open model, OpenAI gpt-oss-120b, and can be reproduced with our publicly available code, in contrast to previous best results that required closed frontier models. Our test-time training runs are performed using Tinker, an API by Thinking Machines, with a cost of only a few hundred dollars per problem.

Materials discovery and design are essential for advancing technology across various industries by enabling the development of application-specific materials. Recent research has leveraged Large Language Models (LLMs) to accelerate this process. We explore the potential of LLMs to generate viable hypotheses that, once validated, can expedite materials discovery. Collaborating with materials science experts, we curated a novel dataset from recent journal publications, featuring real-world goals, constraints, and methods for designing real-world applications. Using this dataset, we test LLM-based agents that generate hypotheses for achieving given goals under specific constraints. To assess the relevance and quality of these hypotheses, we propose a novel scalable evaluation metric that emulates the process a materials scientist would use to evaluate a hypothesis critically. Our curated dataset, proposed method, and evaluation framework aim to advance future research in accelerating materials discovery and design with LLMs.

Developing an educational test can be expensive and time-consuming, as each item must be written by experts and then evaluated by collecting hundreds of student responses. Moreover, many tests require multiple distinct sets of questions administered throughout the school year to closely monitor students' progress, known as parallel tests. In this study, we focus on tests of silent sentence reading efficiency, used to assess students' reading ability over time. To generate high-quality parallel tests, we propose to fine-tune large language models (LLMs) to simulate how previous students would have responded to unseen items. With these simulated responses, we can estimate each item's difficulty and ambiguity. We first use GPT-4 to generate new test items following a list of expert-developed rules and then apply a fine-tuned LLM to filter the items based on criteria from psychological measurements. We also propose an optimal-transport-inspired technique for generating parallel tests and show the generated tests closely correspond to the original test's difficulty and reliability based on crowdworker responses. Our evaluation of a generated test with 234 students from grades 2 to 8 produces test scores highly correlated (r=0.93) to those of a standard test form written by human experts and evaluated across thousands of K-12 students.

The emergence of Large Language Models (LLMs) has catalyzed a paradigm shift in programming, giving rise to "vibe coding", where users can build complete projects and even control computers using natural language instructions. This paradigm has driven automated webpage development, but it introduces a new requirement about how to automatically verify whether the web functionalities are reliably implemented. Existing works struggle to adapt, relying on static visual similarity or predefined checklists that constrain their utility in open-ended environments. Furthermore, they overlook a vital aspect of software quality, namely latent logical constraints. To address these gaps, we introduce WebTestBench, a benchmark for evaluating end-to-end automated web testing. WebTestBench encompasses comprehensive dimensions across diverse web application categories. We decompose the testing process into two cascaded sub-tasks, checklist generation and defect detection, and propose WebTester, a baseline framework for this task. Evaluating popular LLMs with WebTester reveals severe challenges, including insufficient test completeness, detection bottlenecks, and long-horizon interaction unreliability. These findings expose a substantial gap between current computer-use agent capabilities and industrial-grade deployment demands. We hope that WebTestBench provides valuable insights and guidance for advancing end-to-end automated web testing. Our dataset and code are available at https://github.com/friedrichor/WebTestBench.

Large language models (LLMs) have made remarkable progress in code generation, but competitive programming remains a challenge. Recent training-based methods have improved code generation by using reinforcement learning (RL) with execution feedback. The more recent framework CURE further incorporates test generation into the training process, jointly training a Coder and a Tester within a single model. At inference time, the Coder generates many candidate programs, and the Tester generates tests from the problem description. The candidate who passes the most of the generated tests is selected as the final answer. However, CURE has two critical limitations. First, the Tester never reads any candidate code, so its tests often fail to expose implementation-specific bugs. Second, the Coder generates every candidate from scratch and never learns to fix a buggy program based on a failed test. To address these limitations, we propose FixAudit, which approaches competitive code generation from a new perspective: starting from a single initial candidate, it iteratively improves the candidate through a targeted test-and-repair debugging cycle. The framework trains one shared model with two specialized roles through four stages: the Fixer, which repairs the current candidate based on a failing test, and the Auditor, which reads the candidate code to generate new tests that expose its remaining bugs. We evaluate FixAudit on three benchmarks: APPS, CodeContests, and xCodeEval. Applied to a 7B model, the framework surpasses the average performance of the larger 32B baseline within the same model family under the zero-shot setting. Compared to strong baselines built on the same 7B base model, FixAudit improves average Pass@1 by 35.1% to 36.8% and average AvgPassRatio by 7.1% to 24.5%.

Text-to-3D (T23D) generation has transformed digital content creation, yet remains bottlenecked by blind trial-and-error prompting processes that yield unpredictable results. While visual prompt engineering has advanced in text-to-image domains, its application to 3D generation presents unique challenges requiring multi-view consistency evaluation and spatial understanding. We present Sel3DCraft, a visual prompt engineering system for T23D that transforms unstructured exploration into a guided visual process. Our approach introduces three key innovations: a dual-branch structure combining retrieval and generation for diverse candidate exploration; a multi-view hybrid scoring approach that leverages MLLMs with innovative high-level metrics to assess 3D models with human-expert consistency; and a prompt-driven visual analytics suite that enables intuitive defect identification and refinement. Extensive testing and user studies demonstrate that Sel3DCraft surpasses other T23D systems in supporting creativity for designers.

Traditional fixed test sets fall short in evaluating open-ended capabilities of foundation models. To address this, we propose ONEBench(OpeN-Ended Benchmarking), a new testing paradigm that consolidates individual evaluation datasets into a unified, ever-expanding sample pool. ONEBench allows users to generate custom, open-ended evaluation benchmarks from this pool, corresponding to specific capabilities of interest. By aggregating samples across test sets, ONEBench enables the assessment of diverse capabilities beyond those covered by the original test sets, while mitigating overfitting and dataset bias. Most importantly, it frames model evaluation as a collective process of selecting and aggregating sample-level tests. The shift from task-specific benchmarks to ONEBench introduces two challenges: (1)heterogeneity and (2)incompleteness. Heterogeneity refers to the aggregation over diverse metrics, while incompleteness describes comparing models evaluated on different data subsets. To address these challenges, we explore algorithms to aggregate sparse measurements into reliable model scores. Our aggregation algorithm ensures identifiability(asymptotically recovering ground-truth scores) and rapid convergence, enabling accurate model ranking with less data. On homogenous datasets, we show our aggregation algorithm provides rankings that highly correlate with those produced by average scores. We also demonstrate robustness to ~95% of measurements missing, reducing evaluation cost by up to 20x with little-to-no change in model rankings. We introduce ONEBench-LLM for language models and ONEBench-LMM for vision-language models, unifying evaluations across these domains. Overall, we present a technique for open-ended evaluation, which can aggregate over incomplete, heterogeneous sample-level measurements to continually grow a benchmark alongside the rapidly developing foundation models.

Test set contamination, wherein test data from a benchmark ends up in a newer model's training set, is a well-documented obstacle for fair LLM evaluation and can quickly render benchmarks obsolete. To mitigate this, many recent benchmarks crowdsource new prompts and evaluations from human or LLM judges; however, these can introduce significant biases, and break down when scoring hard questions. In this work, we introduce a new benchmark for LLMs designed to be immune to both test set contamination and the pitfalls of LLM judging and human crowdsourcing. We release LiveBench, the first benchmark that (1) contains frequently-updated questions from recent information sources, (2) scores answers automatically according to objective ground-truth values, and (3) contains a wide variety of challenging tasks, spanning math, coding, reasoning, language, instruction following, and data analysis. To achieve this, LiveBench contains questions that are based on recently-released math competitions, arXiv papers, news articles, and datasets, and it contains harder, contamination-free versions of tasks from previous benchmarks such as Big-Bench Hard, AMPS, and IFEval. We evaluate many prominent closed-source models, as well as dozens of open-source models ranging from 0.5B to 110B in size. LiveBench is difficult, with top models achieving below 65% accuracy. We release all questions, code, and model answers. Questions will be added and updated on a monthly basis, and we will release new tasks and harder versions of tasks over time so that LiveBench can distinguish between the capabilities of LLMs as they improve in the future. We welcome community engagement and collaboration for expanding the benchmark tasks and models.

AI-based design tools are proliferating in professional software to assist engineering and industrial designers in complex manufacturing and design tasks. These tools take on more agentic roles than traditional computer-aided design tools and are often portrayed as "co-creators." Yet, working effectively with such systems requires different skills than working with complex CAD tools alone. To date, we know little about how engineering designers learn to work with AI-based design tools. In this study, we observed trained designers as they learned to work with two AI-based tools on a realistic design task. We find that designers face many challenges in learning to effectively co-create with current systems, including challenges in understanding and adjusting AI outputs and in communicating their design goals. Based on our findings, we highlight several design opportunities to better support designer-AI co-creation.

The primary way to establish and compare competencies in foundation and generative AI models has shifted from peer-reviewed literature to press releases and company blog posts, where model builders highlight results on selected benchmarks. These artifacts now largely define the state of the art for researchers and the public. Despite their prominence, which benchmarks model builders choose to highlight, and what they communicate through this selection, is underexamined. To investigate, we introduce and open-source Benchmarking-Cultures-25, a dataset of 231 benchmarks highlighted across 139 model releases in 2025 from 11 major AI builders, alongside an interactive tool to explore the data. Our analysis reveals a fragmented evaluation landscape with limited cross-model comparability: 63.2% of highlighted benchmarks are used by a single builder, and 38.5% appear in just one release. Few achieve widespread use (e.g., GPQA Diamond, LiveCodeBench, AIME 2025). Moreover, benchmarks are attributed different competencies by different builders, depending on their narrative. To disentangle these conflicting presentations, we develop a unified taxonomy mapping diverging terminology to a shared framework of measured signals based on what benchmark authors claim to measure. "General knowledge application" is the second most popular, yet vaguely defined, category. Qualitative analysis shows many such benchmarks deemphasize construct validity, instead framing results as indicators of progress toward AGI. Their authors claim to measure knowledge or reasoning broadly, yet mostly evaluate STEM subjects (especially math). We argue that highlighted benchmarks function less as standardized measurement tools and more as flexible narrative devices prioritizing market positioning over scientific evaluation. Data: https://hf.co/datasets/matybohacek/benchmarking-cultures-25; tool: https://bench-cultures.net.

We introduce Multi-Objective Counterfactuals for Design (MCD), a novel method for counterfactual optimization in design problems. Counterfactuals are hypothetical situations that can lead to a different decision or choice. In this paper, the authors frame the counterfactual search problem as a design recommendation tool that can help identify modifications to a design, leading to better functional performance. MCD improves upon existing counterfactual search methods by supporting multi-objective queries, which are crucial in design problems, and by decoupling the counterfactual search and sampling processes, thus enhancing efficiency and facilitating objective tradeoff visualization. The paper demonstrates MCD's core functionality using a two-dimensional test case, followed by three case studies of bicycle design that showcase MCD's effectiveness in real-world design problems. In the first case study, MCD excels at recommending modifications to query designs that can significantly enhance functional performance, such as weight savings and improvements to the structural safety factor. The second case study demonstrates that MCD can work with a pre-trained language model to suggest design changes based on a subjective text prompt effectively. Lastly, the authors task MCD with increasing a query design's similarity to a target image and text prompt while simultaneously reducing weight and improving structural performance, demonstrating MCD's performance on a complex multimodal query. Overall, MCD has the potential to provide valuable recommendations for practitioners and design automation researchers looking for answers to their ``What if'' questions by exploring hypothetical design modifications and their impact on multiple design objectives. The code, test problems, and datasets used in the paper are available to the public at decode.mit.edu/projects/counterfactuals/.

Large language model (LLM) unlearning has become a critical mechanism for removing undesired data, knowledge, or behaviors from pre-trained models while retaining their general utility. Yet, with the rise of open-weight LLMs, we ask: can the unlearning process itself be backdoored, appearing successful under normal conditions yet reverting to pre-unlearned behavior when a hidden trigger is activated? Drawing inspiration from classical backdoor attacks that embed triggers into training data to enforce specific behaviors, we investigate backdoor unlearning, where models forget as intended in the clean setting but recover forgotten knowledge when the trigger appears. We show that designing such attacks presents unique challenges, hinging on where triggers are placed and how backdoor training is reinforced. We uncover a strong link between backdoor efficacy and the attention sink phenomenon, i.e., shallow input tokens consistently attract disproportionate attention in LLMs. Our analysis reveals that these attention sinks serve as gateways for backdoor unlearning: placing triggers at sink positions and aligning their attention values markedly enhances backdoor persistence. Extensive experiments validate these findings, showing that attention-sink-guided backdoor unlearning reliably restores forgotten knowledge in the presence of backdoor triggers, while behaving indistinguishably from a normally unlearned model when triggers are absent. Code is available at https://github.com/OPTML-Group/Unlearn-Backdoor.

The proliferation of face forgery techniques has raised significant concerns within society, thereby motivating the development of face forgery detection methods. These methods aim to distinguish forged faces from genuine ones and have proven effective in practical applications. However, this paper introduces a novel and previously unrecognized threat in face forgery detection scenarios caused by backdoor attack. By embedding backdoors into models and incorporating specific trigger patterns into the input, attackers can deceive detectors into producing erroneous predictions for forged faces. To achieve this goal, this paper proposes Poisoned Forgery Face framework, which enables clean-label backdoor attacks on face forgery detectors. Our approach involves constructing a scalable trigger generator and utilizing a novel convolving process to generate translation-sensitive trigger patterns. Moreover, we employ a relative embedding method based on landmark-based regions to enhance the stealthiness of the poisoned samples. Consequently, detectors trained on our poisoned samples are embedded with backdoors. Notably, our approach surpasses SoTA backdoor baselines with a significant improvement in attack success rate (+16.39\% BD-AUC) and reduction in visibility (-12.65\% L_infty). Furthermore, our attack exhibits promising performance against backdoor defenses. We anticipate that this paper will draw greater attention to the potential threats posed by backdoor attacks in face forgery detection scenarios. Our codes will be made available at https://github.com/JWLiang007/PFF

We introduce PaperBench, a benchmark evaluating the ability of AI agents to replicate state-of-the-art AI research. Agents must replicate 20 ICML 2024 Spotlight and Oral papers from scratch, including understanding paper contributions, developing a codebase, and successfully executing experiments. For objective evaluation, we develop rubrics that hierarchically decompose each replication task into smaller sub-tasks with clear grading criteria. In total, PaperBench contains 8,316 individually gradable tasks. Rubrics are co-developed with the author(s) of each ICML paper for accuracy and realism. To enable scalable evaluation, we also develop an LLM-based judge to automatically grade replication attempts against rubrics, and assess our judge's performance by creating a separate benchmark for judges. We evaluate several frontier models on PaperBench, finding that the best-performing tested agent, Claude 3.5 Sonnet (New) with open-source scaffolding, achieves an average replication score of 21.0\%. Finally, we recruit top ML PhDs to attempt a subset of PaperBench, finding that models do not yet outperform the human baseline. We https://github.com/openai/preparedness{open-source our code} to facilitate future research in understanding the AI engineering capabilities of AI agents.